Tips to Teach Your Children to Save Water

Water is a necessity for survival.

Considering the rapid growing population and the fact that water is a limited resource on this planet, it has become more important than ever that children understand the significance of water conservation from an early age.

Teaching children to save water at a young age will not only help you save on your utility bills but it will also foster an interest and concern in your children towards the planet.

That said, here are some tips to teach and practice water conservation at home with your children.

Get kids acquainted with interesting facts about water

Water conservation is a serious concern, but that does not mean teaching children to save water can not be fun.

There is a wide range of interesting facts about water you can tell your child, to emphasize on the necessity of water, such as:

• Water makes up to 70% of the earth's surface. 90% of it is salt water, which is found in oceans and is not suitable for drinking.

• Only 2.5% of earth's water is fresh water and 70% of the earth's fresh water is frozen in glaciers and ice caps.

• The total amount of water on earth is the same amount as it was when earth was created, millions of years ago.

• 70% of human brain is composed of water and the average adult body is about 60% water.

• Water is available in three forms on this planet: solid, liquid and gas.

These were just a few facts and you can discover more such information about water on the web. Children are more likely to remember what they have been taught when they learn it through small points and factoids instead of long boring sessions.

Moving on to “dos” & “don'ts”

Education begins at home. Before your child gets to the chapter in their textbook that talks about water conversation at school, you can inculcate water-saving habits in your child by teaching them the following dos and don'ts;

• Do turn off the faucets tightly.

• Do not leave the tap running while brushing or washing hands.

• Do take a shower instead of a bath as it uses less water. If you must take a bath, fill the tub with just enough water to cover the knees and not more than that.

• Do not throw tissues, paper or candy wrappers in the toilet as it will use more water to flush those materials off.

• Do let parents know if you spot a leaky faucet, bathtub, water cooler or any other appliance that uses water.

• Do use water from leftover bottles, ice cubes, bathroom buckets and half-drank glasses, to hydrate the grass and plants.

• When not using sprinklers, do move the hoses to the grassy areas.

• When unable to finish the whole glass of water, save the remaining water in the refrigerator instead of pouring down the sink.

• Do use a mug and bucket of water to clean your bicycle instead of a hose.

Additional tips to encourage water conservation in children

• Whenever your child takes a water-saving action, reward them to make them feel positive about their deed and encourage them to keep doing it.

• Earth day and water day are great opportunities to teach your little ones to care for their planet and the importance of preserving the earth's resources. So, keep an eye out for events being organized in your local region on these days and get your child involved in the celebrations.

• Suggest teachers and school's management to organize educational camps and programs to teach children about water conservation.

• Encourage your tech-savvy children to look up for videos, tips and resources related to water conservation online. By allowing your children to search for water saving tips on the internet on their own, you will provide them a fun way to learn about importance of saving water.

• Involve children in your water management routine and practices like when you are searching for water leaks around your house, ask your children to join in and help you spot leaky areas.

Children are never too young to learn about the importance of water as a natural resource that humans need for survival. With these tips and practices, you will not only teach your child to use water wisely and prevent waste but also build a foundation of love and care for their planet.

7 Actionable Electrical Safety Tips During Storms

Unpredictable weather such as storms and flood are a part of life. Therefore, it is important to take the time to prepare your family and property.

There are a number of simple steps you can take to protect personal safety, preserve electrical equipment and deal with potential damage to the home's electrical system. Make sure you are electrically safe by following these 7 tips:

1. Put safety first

Do not attempt do-it-yourself repairs if your property sufferers storm damage, including your home's electrical system and any electrical appliances affected. Be ready before a storm or wet season.

– Install a safety switch and test it regularly.

– Know where to turn off your power, gas and water supply in an emergency.

– Pack up electrical equipment that's not in use and store in a safe place.

2. Protect the system

Ask an electrician with experience in domestic electrical services about having lighting protection installed in your switchboard to protect all appliances.

3. Unplug before the storm

– Unplug outside TVs and non-fixed aerials and store in a dry area.

– When a storm approaches switch off and unplug sensitive appliances or equipment.

– Shut down your solar PV system using the safe isolation procedure.

4. Do not connect during the storm

Do not use equipment directly connected to electricity, including the stove, during a storm.

– If you've lost power, turn off your power points and unplug electrical equipment.

– Do not use a fixed telephone during a thunderstorm – it can deliver an electric shock.

– If flood waters are expected, shift electrical equipment to higher locations.

5. Be cautious of wires

Do not go outside to check the damage before an electrician arrives, especially during a storm, as fall power lines are easily understood and can be deadly.

– If you are in a car, stay away from power lines, trees and watercourses. Stay in your vehicle.

– If you have a solar PV system that has been damaged in a flood, storm or cyclone you need to have an electrical contractor inspect the system and check it is safe.

– Check your electrical appliances and equipment. Using water-damaged equipment can result in electric shocks and fires.

6. Call an electrician before your energy distributor

If the wires have been torn down in a black out, most houses will require internal repairs before the power can be reconnected.

– Dispose of or have a licensed electrical contractor repair water-affected household electrical items, such as kettles, toasters and televisions.

– Call a licensed electrician to check all hard-wired electrical appliances, such as air-conditioning units or stoves, intended for re-use. This safety check may be required before the power supply can be reconected.

7. Be confident in your contractor

If you suffer storm damage connect with a local electrician . If you are using power from generators, it can be dangerous if incorrectly managed.

– Connect your generator to your house electrical wiring using a generator change-over switch and appropriate socket. These switches must be installed by a licensed electrical contractor.

– Do not connect your generator to your house using a power point on a power circuit or any other connection point. This can cause dangerous 'back-feeding'.

During storm seasons, it is definitely worth being extra careful with your home electrical systems and equipment. The practical stops you take could reduce the risk of electrical fires and safeguard your family from any potential hazards.

What Are The Pros and Cons Of A Diesel Generator?

The diesel generator is regarded as the best option in situations that demand a continuous power supply. They are a popular choice in many environments, such as hospitals, construction, hypermarkets and events. Let's take a look at a few of the benefits of a diesel generator:

Fuel-efficient – the diesel generator is very fuel-efficient when compared to similar options, such as those running on petrol. On average, the diesel unit has the ability to consume nearly 50% less fuel compared to the petrol alternative.

More economic – the ability to run longer on a full tank means the running costs are a lot less. This is certain to benefit in any environment that needs to offer a constant source of power. This can include a job site that needs a reliable option to power the many different tools.

Low maintenance – the diesel generator is reliably easy to keep running. Maintenance is kept to a minimum because this type of generator does not have internal components like carburetors or spark plugs. However, a typical job that still needs to be completed at regular intervals is the oil changes.

Life span – the life span of this type of generator is quite impressive. On average, the diesel generator can last approximately three times longer than alternative units.

Low operation risks – diesel is naturally safe to use with a lot lower risk of ignition when compared to other fuel options, such as petrol.

Best for regular use – the diesel generator is typically the preferred option if the intention is to use on a very frequent basis. Alternately, the petrol unit is adequate for the infrequent use.

Are there any negatives

Beyond the many benefits of using the diesel generator, it is also worth taking a look a few of the less appealing qualities.

Operating noise – if the generator is not fitted with a sound proof casing, there is a high chance it will sound a little loud and will often be more noticeable than a comparable petrol unit.

Less environmentally friendly – the emissions produced by diesel are not the most environmentally friendly. Other options like the petrol engines are the more favored choice for those wanting something a bit more beneficial to the environment.

Heavy units – the majority of the diesel units are built with the reliably large and heavy components. This can make it a lot more difficult to transport and service this type of unit.

Why It Benefits to Have a Generator

A heavy storm blowing through town can easily lead to a loss of electricity. A lack of power to a home or business for even a short period of time can cause a wide range of difficulties. Let's take a look at a few benefits of having a portable or fixed generator ready to use:

Medical equipment

A constant electrical supply is essential for people who rely on medical equipment at home. A typical piece of hardware is the oxygen machine. This is a small piece of machinery that can easily be powered by a portable generator in the event of a power cut. Also, for the elderly or those with breathing problems it can benefit to keep the air conditioner working in hot weather.

Sump pumps

Keeping the pump pump running at all times is important to minimize flooding related issues. A backup generator will make sure the pump is able to continue operating even in times of the heaviest downpours.

Home appliances

A standard use of the generator is to keep the main home appliances running, such as the refrigerator, freezer, or coffee machine. Also, if it is possible to keep things like the internet and television running, the time you are left waiting for the power to be switched back on will be less stressful.


Contractors working on a new building site often thanks to one of the portable generators to power tools. A few situations where portable power is needed are with lights at night-time and hand hand-tools like an air compressor, driller, saw, angle grinder, etc.

Business environment

Installing a generator in a business environment will make sure a short-term power outlet does not have a negative impact on trade. Many businesses can benefit from a generator. For instance, a small business like a butcher shop, rural market or family restaurant can continue to trade and avoid the loss of money and time related to a period of not having a local power supply. Even a compact generator is enough to keep a business trading for a short period.

Outdoor activities

A portable generator is a useful piece of kit for a wide range of camping and recreational activities. If camping in the wilderness, many people will still want to benefit from a few home luxuries, such as the ability to power a refrigerator or using a coffee maker first thing in the morning. Also, they are just as useful for backyard or park based activities.

3 Major Types of Generators

The generator is an essential piece of machinery in the event of a power cut. They are very efficient at converting a fuel supply like gasoline, diesel or propane into a source of electrical power. The main types include standby, inverter and portable. Let's take a look at these popular types of generators:


A portable generator will accept a fuel supply of diesel or gas and makes a very practical option for a short-term loss of electrical power. This type of generator relies on a combustion engine to provide a reliable supply of energy. They are built to operate at 3600 RPM to provide the basic 60 Hz of current. A major benefit is the fact this type of generator is designed to be very easy to more from location to location. This means that they are a useful option to locate at difficult to reach sites. However, they are not built to deliver a source of power to the most energy demanding systems. A portable generator is a useful option for items like a refrigerator, freezer, television, or lights. Beyond the ability to give energy in times of a power cut, they can also help to power tools at a newly developed or remote location.


The inverter generator relies on a combination of an alternator and engine to naturally generate AC power. Additionally, a rectifier is used when it is necessary to transfer the energy source from AC power to DC power. This is a very reliable option to produce a constant flow of energy to keep an appliance running. They are generally very energy-efficient with the ability to automatically adjust the speed of the engine to match the power needed for a particular object. Also, the lightweight and compact size of this type of generator makes it a practical choice for using on boats, recreational vehicles and cars.


The standby generator is designed to operate automatically and makes use of a transfer switch that activates in the event of a power loss to guarantee a permanent source of energy. Any potential power loss will be very brief and likely to last a matter of seconds before the generator's sensor senses the cut in power. Also, this generator gives great flexibility in use with the option to run on either natural gas or liquid propane. Once the main utility power has returned the generator will turn itself off. This generator is a common part of many safety systems, such as those used for life support equipment, standby lighting and elevators.

Importance of Rental Power Sources

Eliminating the increasingly expanding global power deficit in a cost-effective and environmentally-friendly manner is one of the biggest challenges of the 21st Century. Inexpensive and eco-friendly energy is essential to the economic growth of a region. The developed countries have already been working on exploring new techniques to produce power. The ongoing transformation from unsustainable energy sources to clean and sustainable energy means is a result of growing demand for clean energy.

Perpetual power outages can have a devastating impact on businesses that do not have reliable alternative power sources to run their operations. It is almost impossible to prevent natural disasters that can destroy electric transmission lines. In such situations, the only source a business can turn to is standby generator.

A strategic use of rental energy can help companies prevent potential outages that can lead to heavy operational losses. Sophisticated generators start automatically within a few seconds after electricity disruptions. They help companies continue their production processes without losing critical data and communication systems.

Businesses often need to buy or rent a backup system to keep their operational processes running during power outages and emergency situations. Needs for a backup system may vary from business to business. No matter why you need rental solutions, make sure you hire a reliable and reputable company that has the capabilities to meet your unique requirements.

It may seem costly to rent a standby generator as it increases the cost of production. However, considering the cost of an outage, it is advisable to have a backup. You should pay attention to some factors before renting a set for your business or house. Rental generators can operate at various levels, ranging from simple home appliances to an entire concession or facility. Select the size, type and capacity of a generator that best fits your budget and operational requirements.

Electricity is an inseparable part of homes and industries. If your facility entirely depends on the main utility line, it is recommended to have a backup plan in place so that you can handle blackouts effectively and keep your business running. Temporary solutions will enable you to deal with emergency situations and keep your operations unaffected. It is better to get familiar with rental generators and how they work. Do not let power disruptions paralyze your entire operation.

In order to save time and money, hire a company that also provides installation and maintenance services along with dependable rental generators.

Load Bank Testing To Verify Generator Performance

Diesel engine power generators are one of the most critical components of an industrial emergency backup plan. The failure of power generators in emergency situations can lead to disastrous conditions. It is important for companies to monitor and maintain the performance of their power systems. This is where load bank testing comes into play and helps facility managers maintain their power equipment. Load bank testing uncovers potential problems in power generators and enable managers to take preventive measures.

Load bank testing is probably the most effective technique to ensure efficient operations of backup generators. No matter the nature or type of a load bank system, it can not only test the equipment but also improve the overall health of backup units. Load bank testing is a process to:

Verify Cooling System Operation

A load test makes the generator inject additional heat into the cooling air stream. This process will indicate malfunctions in the cooling system. The additional heat created during the process also puts stress on components of a cooling system: thermostat, oil cooler, radiator, etc. We can also obtain valuable data from a testing process that can help us with temperature differential. The temperature data also helps verify backup unit compliance. The process verifies the operations of cooling system alerts such as engine coolant overheat and high cooling water temperature alarm.

Verify Fuel System Operation

Latest diesel engine models are highly turbocharged, which makes them poor to poor combustion at low loads and over fueling. Sometimes power systems do not operate at a load high enough to generate flow velocities and high exhaust temperatures. This situation can lead to issues like wet stacking or accumulation of debris in the exhaust system. These problems can seriously damage the overall performance of a backup system; operation in an unloaded condition or continuous use at less than what is the recommended level of load can eliminated engine output capacity.

Verify control operation

Power supplies and controls of a generator are sensitive to transients, and, when load changes, can shut down unexpectedly. An inductive or resistive load test is the best way to ensure smooth generator operations. A reliable testing procedure can help unexpected many electrical and operational issues such as voltage and frequency adjustments, failed connections, circuit breaker trip settings, and voltage regulator performance. It also provides a best-case simulated real-world condition where efficiency, harmonics, and voltage drop can be studies effectively.

These are some of the benefits of load bank testing. Make sure you are taking good care of your power equipment and generator sets. You can hire a private company to deliver rental load bank testing and preventive maintenance services at your doorstep.

How to Do Home Electricity Repair

Electricity problems at home can be quite unnerving and it can be frustrating when it occurs at midnight especially in summers. An electrician may not be available at all hours. So a basic knowledge about residential wiring and common electricity problems can help you through the havoc. A basic understanding is all that you require. However, avoid solving these issues if they are at greater risk because no matter how much knowledge you have, experience can put you on missing ground.

Understanding residential wiring

Mostly home electricity is provided with two hot wires and one neutral coming into them which supplies you a voltage of 240/120 volts. However, the basic voltage is slightly less which is around 230/110 volts. This power supply is called single phased power.

You may be aware of alternating current which is taught in physics. So, the power coming to your home is indeed alternating. In common language, alternating current allows electricity to be transported along long distances. Here, it is feasible for the power department to provide you with electricity.

Now coming to wiring systems again, if you notice only one hot wire along with neutral then you might be getting a power of only 115 volts. It all depends on the wiring system. This type of wiring, however, is mostly seen in electrical devices. Few exceptions like dryer or hot water tanks use both hot and neutral wires use up to voltage of 230 volts.

Basic things to know before working on them

I know, this is highly fascinating but do not tear your electrical devices to see the wiring or your residential power supply because it can be life threatening. Always remember to switch the circuit off before working on them even if the power is down. Keep your contact voltage tester with you. Look at the wirings carefully, it is highly capable to have more than one circuits in a single box. Find the one that you switched off. Wiring system is complex so do not rush and double check yourself.

Working with electricity is dangerous than any task and comes with unfavorable outcomes. So, wear safety gears. If you do not have one then simply wear rubber slippers. They will protect you from electric shocks.

Secondly, every home is provided with a “main service panel” which contains circuit breakers or fuses for maintaining the electricity at your home. Whenever power goes off, check the service panel because in case it might be disconnected.

With this wonderful knowledge you will be able to fix minor problems. Do not take risk of solving the major issues as it can be hazardous.

How to Choose the Right Wiring System

For proper functioning of any equipment or even transfer of electricity in buildings the paramount factor is always the choice of the right wires. Low quality or weak wiring system will cater reduced performance of equipment and poor electricity in building. The wrong choice of wire can also beget disaster ergo you should take notice of following before choosing a wiring system:

1. Safety:

Of course safety is our cardinal concern. We want everything to be safe from electricity hazards. Wires should protect the equipment from damage by being resistant to physical or fire damage. If you need extra protection from fire hazards then conduit wiring is the best option to choose from.

2. Wiring cost:

Next to safety is wiring cost. This is a myth that more the money invested; more would be the safety. You want your apartment to be safe this does not mean that only a huge amount of bucks can fulfill that but vice versa is equally true even. Wiring system should be cost effective and safe both at the same time. It should not be exorbitant for you to afford.

3. Load:

There are always voltage fluctuations and your choice of wire should be capable of handling voltage loads. Thin wires can not hold such fluctuations and may lead to short circuits easily. Pay close attention while deciding on a wire. Keep in mind that less the diameter of the wire lower is the load efficiency.

4. Durability And Permanence:

Wiring system is more of a permanent system and not changed frequently. So it should be durable enough to withstand temperature changes, moisture, fumes and chemicals. It should not over heat while high voltage levels. What makes a wire durable? The materials it is made of. Check the material used in wire, level and type of sheathing material used. The main point is resistance check.

5. Appearance:

What appearance has to do with wiring? It is because you want wires to be identifiable. Wires should have an aesthetic appeal to them and color for you to identify easily. Again, make sure aesthetics do not cost you much.

6. Design versatility:

The design of the wires should be such that it can be modified in case of your requirements. Wires should be versatile so that they can be upgraded.

Select the type of wire which is under your budget, safe and efficient. The wiring system is to protect you and make sure it offers you with the same.

Glow Wire Tester: A Detailed Study

Safety should be the paramount interest in the case of an appliance wiring system. As the consequences of the short-circuit, human misapplication, over-current, it can spark and catch fire anytime. This is why fire protection requirement is a must. Fire protection requirements are created to test, evaluate and rate the flammability of the materials used to build an appliance. After 2001, glow wire testing is one of the necessary things used in the appliance industry.

What is glow wire testing?

Needless to say, a significant number of methods have been created to evaluate material flammability and fire resistance. These include both direct flame and indirect flame testing methods. The direct flame testing method is a widely accepted method. It involves applying a flame directly to a horizontally or vertically mounted specimen under controlled conditions. On the other hand, the acceptance of indirect flame testing method is growing gradually after 2001. It includes a non-flaming heat source applied to a sample. Glow wire testing undergoes the second category. To be more accurate, it is an example of the indirect flame testing method.

Glow wire testing is basically an indirect safety test designed to test the flame resistant properties of plastic materials used to electrical appliances of devices. The objective of designing it is to ensure safety. It protects the fire caused by overheated or electrically energized parts. In many cases, overheated parts ignite plastic materials covering them from all sides. This can happen even in the case of normal use. The glow wire simulates an over-heated part that comes in contact with plastic materials and sets fire. This testing method gives a way to weigh and compare the materials' tension that aids to resist ignition and self-extinguishing flames. As the consequence of it, fire can not spread via dripping.

Declaring the existing testing methods provide in covering all ignition sources, The International Electrical Commission (IEC) introduced the glow-wire testing method in 2001. Since then to date, this method has been updated and upgraded many times to make it more clearer and clearer . Now the popularity of this method is growing rapidly.

Glow Wire Tester

From the above paragraphs, it is very clear that a Glow Wire Tester is used to determine the fire hazard of electrical parts and components subjected to various malfunctions like reasonable abnormal use, overload, poor connection, short-circuit, or others that might ignite and spread the flame to the other part of the product. Modern Glow-Wire Testers simulate an overloaded resistor or another ignition source. These apply heat to the specimen for a shorter period of time and simulate it as closely as possible to know the actual effects coming during the time of practice.

A temperature controller is fitted well with the thermocouple supplied with it to measure the glow wire temperature accurately. The electrical circuit of the control unit is completely protected by using fuses and a miniature circuit breaker.

Nowadays many reputable companies are manufacturing these to ensure the safety of the operators. You need to get one manufactured by a reputable company.