Top Electricity Safety Tips

Electrical items need treating with a certain level of caution to ensure the safety of you and the loved ones. An electrical mishap has the potential to cause a range of accidents or can even lead to fires inside the home. Below are six electricity safety tips:

1) Avoid overloading the sockets. Ideally, you want to have using a separate socket for every plug or appliance that you want to use. If you are using one of the extension cords or adapters, you want to make sure the total plugs used with a single adapter are not likely to go above the specified output rating for that adapter.

2) Use a residential current device. By installing a RCD you are able to easily prevent shocks and cut off power if the need arises. Many of these devices are intended to attach to the fuse box, although you do also have the option of the portable units.

3) Make sure that sockets, plugs, and wires are kept in a high state of repair at all times. If you do start to see signs of fraying or wear, or anything similar that might indicate signs of damage, you generally want to stop using the device until any defects have been repaired.

4) Avoid trailing electrical wires over sources of heat. Heaters, stove tops, toasters, or similar appliances are able to easily burn and damage the protective outer coating on the cables. And this has the potential to cause a fire.

5) Be sure to keep water clear of electrical items. Since it is highly dangerous to spill liquid onto any electronics you always want to make sure that the hands are dry if touching or using anything that is electrical. It is also wise to avoid placing a glass of water of similar item on top of an electrical appliance.

6) Be aware outside the home. In addition to the many situations where you need to be careful inside the home, you also need to take certain precautions when outside. If for the example you are going to be doing some landscaping and using a digger, you might want to contact the power company to make sure that there are not any underground wires in the local vicinity. You want to make avoid overhead power lines which may be touched in those situations of using long-handled tools or carrying a ladder. Also, if you are working in the backyard you want to avoid using power tools including the lawnmower after a recent rain shower and the grass is still wet.

0 replies

Leave a Reply

Want to join the discussion?
Feel free to contribute!

Leave a Reply

Your email address will not be published.